Site icon AranaCorp

Programming a Raspberry Pi Pico in C++ with Visual Studio Code

Xukyo

Let’s take a look at how to program the Raspberry Pi Pico microcontroller in C++ using Visual Studio Code. The Raspberry Pi Pico board is a microcontroller based on the RP2040 chip from Raspberry Pi. It is programmable in C++ and MicroPython and can interact with any type of equipment.

Hardware

Installing and configuring Visual Studio Code

Go to the Visual Studio Code download page and download the version corresponding to your OS.

Launch the installer and follow the procedure

In Extensions, search for and install PlatformIO IDE

N.B: If the PlatformIO installation displays an error, please follow the solutions described on this page. For solution3: update platformio version (i.e: get-platformio-1.1.2.py)

Creating a project for Raspberry Pi Pico

Cliquez sur l’icone PlatformIO dans la barre à gauche puis sélectionnez Projects & Configuration dans le menu Quick Access. Créer un nouveau projet

Search for the Raspberry Pi Pico board and select the Arduino Framework

Search for the Raspberry Pi Pico board and select the Arduino Framework

#include <Arduino.h>

//Variables 
bool ledStatus = 0; 

void testLed( ){ 
	digitalWrite(LED_BUILTIN,HIGH); 
  	Serial.println(F("LED ON")); 
	delay(500); 
	digitalWrite(LED_BUILTIN,LOW); 
  	Serial.println(F("LED OFF")); 
	delay(500); 
} 

void setup(){ 
	//Init Serial USB 
	Serial.begin(9600); 
	
	Serial.println(F("Initialize System")); 
	//Init led 
	pinMode(LED_BUILTIN,OUTPUT); 
 
} 
 
void loop(){ 
	testLed(); 
}

Once you’ve written your code, you can compile it by clicking on the “Build” icon.

Once you’ve written your code, you can compile it by clicking on the “Build” icon.

You can then copy the firmware.uf2 file to the Raspberry Pi Pico, which is then seen as a USB storage device.

Upcoming uploads

Once the first code has been loaded onto the Raspberry Pi Pico, it will no longer be available as a USB storage device. To load a code again, you’ll need to either:

N.B.: If PlatformIO’s Upload button doesn’t work, you can try installing libUSB with Zadig

Results

As with Arduino, you can observe debug messages in PlatformIO’s serial monitor.

Sources



Exit mobile version